Industrial Filters

Series: FYFO – FYCA (cast)FYWE (welded,lateral) – FYMA (machined)from 1/2” to 2” max rating 4500

The Y filter is the most common and economical type of filter for permanent fluid or gas applications.

Thanks to its compact construction, its light weight and its easy access for rapid cleaning, it is used for many generally standard system applications.

Permanent filter, straight line, suitable for filtering fluids in either the liquid state (water, seawater, petroleum and its derivatives) or the gaseous state (gas, air, chemical products) through a perforated plate filter element placed perpendicular to the direction of flow.

Obtained from a machined forged billet, the standard equipment includes a screen suitable for high pressures, which is easy tomaintain and replace; capable of filtration of more than 200% of the inlet area.

Series: FMBA – FCAR (cartridge)FDPX (duplex)from 2” to 24” and over, rating from150 to 2500Temporary

Permanent filter type, offering a larger filtering surface area than other types of filters, ensuring minimal pressure loss even at high flow rate.

It has a greater capacity for particulate accumulation, and is recommended for the low ratio between the periods of service and maintenance.

Consists of a cylindrical body with connecting flanges disposed perpendicular to filtering element, has a basket made of a perforated calendered sheet.

Standard equipment includes a basket suitable for high pressure, easy maintenance and replacement, capable of filtering more than 300% of the inlet area.

Series: FCO1 – FCO2 – FCO3from 2” to 24” and over, rating from150 to 2500

Temporary filter, in-line, suitable for filtering fluids or gases, designed for short periods of employment, such as the fine-tuning and start-up of a plant.

Installed to remove any coarse detritus such as rags, electrodes, deposits scale and rust left inside the pipes.

Consist of a rolled perforated sheet in the form of a cone welded perpendicularly to a ring joint, the conical filter is easy to install and replace because it is positioned between two flanges of a pipe.

Filter suitable for high pressures, easy to maintain and replace and capable of filtration of more than 200% of the inlet area.

Series: FTEE – FATE (angle tee)from 2” to 24” and over, rating from150 to 2500

Permanent filter, straight line, suitable for filtering fluids in either the liquid state (water, seawater, petroleum and its derivatives) or the gaseous state (gas, air, chemical products) through a perforated plate filter element placed perpendicular to the direction of flow.

Obtained from an extruded or welded T-joint, it ensures a large surface area for flow and thus offers a high filtration capacity with a low loss of pressure even at high rates.

The standard equipment includes a screen suitable for high pressures, which is easy to maintain and replace and capable of filtration of more than 200% of the inlet area.